Where to buy
JQG9009T
JQG7505
JQG7501
JQG7501.G
JQG9001
JQG7502
This situation occurs when the battery will soon lose power. A slow repetitive sound and faint sparking may occur and we recommend replacing the battery. We recommend changing the battery on FOTILE appliances once a year. The battery box is located on the underside of the appliance and takes a D size battery.
In the ignition process, many new users usually let it go as soon as they see sparks, resulting in the low success rate of ignition. It is suggested that in the operation, the user should press the button down in place and rotate it to the left, hold until the pattering sound is heard, continue for 2-3 seconds, and the ignition success rate will be improved.
The following two reasons may also cause such situation:
(1) There is a lot of residual gas in the pipe, please try to ignite it a few more times. 【After the change of new gas container, you can also follow this method in operation.】
(2) The fire cover is not positioned accurately. It is recommended that you should check if the fire cover is placed on the flat position, if it is closed, and if the protective umbrella is aiming at the ignition needle.
When cleaning the cooktop panel, use neutral and non-corrosive cleanser for the burner. If the stainless steel panel is contaminated, it shall be cleaned with wet soft cloth timely with neutral detergent.
Burner's moveable parts, such as the copper fire cover, shall be cleaned often with hot water and neutral detergent. Remove the sintered lumps and wipe it dry with cloth before use.
It is strictly prohibited to use steel wool to clean the cooktop panel, so as to avoid scratching the panel.
It can be installed. But firstly for the purpose of aesthetics, and secondly as the surrounding of the cooktop will bear load, the square angle is easy to crack after long time use. Hence it is suggested to open the hold matching angle of FOTILE cooktop.
Remove pan support and burner cap to see the two needles at the center of the stove. The white needle is the igniter and the yellow copper needle is the thermocouple. If the thermocouple becomes dirty or damp, it can effect the ability to ignite the flame. We recommend using a dry rag or paper towel to wipe the thermocouple.
The partial ignition occurs usually because after using for a long time, the oil stains and food residue blocks the fire hole. No ignition at the external fire cover is usually because of flash slot jamming. Take a clean too will be solved.
Ignition time of 10 seconds or less is normal.
Do not casually modify or replace with different gas source or nozzles. If a change of gas source is required, please consult the local after-sales service hotline.
Side Suction/European style: Top of the left case body, Chinese style: Right side of the range hood.
fotile overseas kitchen appliance co., ltd. all rights reserved